Filter
Top Products
DISASSEMBLY AND ASSEMBLY
Rev. B
3-
3
3.1.2 Tools
This section describes the tools required for assembling, disassembling, or adjusting the printer.
Note : Refer to CHAPTER 4 for adjustment tools, CHAPTER 5 for troubleshooting tools, and
CHAPTER 6 for tools for maintenance, lubrication, and adhesives.
Table 3-1. Recommended Tools
Tool Type Class Code Reference
(+) Driver No.2
(20 mm or more shaft length with
magnetization is recommended.)
o A B743800200 -
(+) Driver No.1 o A B743800400 -
Box screw driver (7 mm / 0.28 inches
across)
o A B741700200 -
E-ring holder No. 3 o A B740800500 -
E-ring holder No. 6 o A B740800800 -
Round nose pliers o A B740400100 -
Diagonal wire cutters o A B740500100 -
Tweezers o A B741000100 -
Electric soldering iron o A B740200100 -
Tension gauge (7000 g) o A B777200301 -
Tension gauge (200 g) o A B765114601 -
Lift handles #E656 E A B765111001 -
Dial gauges #F610 E A B101946600 Figure 3-3
Dial gauge base #F611 E A B101946700 Figure 3-4
Dial gauge master #F612 E A B101946800 Figure 3-5
Thickness gauge (t=0.43mm) o A - Figure 3-6
Thickness gauge (t=0.80mm) o A - -
Motor screwdriver
(Phillips head, torque adjustable)
oB - -
o: Commercially available
E: EPSON exclusive
A: Mandatory
B: Recommended