Filter
Top Products
GENERAL DESCRIPTION
Rev. B
1-
4
3
1.5.7 Control Panel
The control panel for this printer consists of switches, LEDs, and buzzers (Refer to Figure 1-22 on page
1-23.).
1.5.8 Housing
The housing used in the DFX-8500 consists of many more components than previous designs.
The lower case is used as the main frame which holds the mechanism and circuits, and they are covered
by the upper case, bottom plate and side cover, each of which has various covers. The housing large
openings in both the front and rear for paper entrance and exit. It also has a lid on the both plate to enable
the PROM on the main board to be easily replaced.
Figure 1-31. Housing