Filter
Top Products
DISASSEMBLY AND ASSEMBLY
Rev. B
3-4
7
3.2.6.14 PG Home Sensor Removal
Step 1: Remove the front/rear tractor select lever assembly. (Refer to Section 3.2.6.2.)
Step 2: Remove the E-ring securing the carriage guide shaft gear to the rear carriage guide shaft.
C arriage G uide Shaft
(R e a r)
E -rin g
C arriage G uide Shaft
G ear
Figure 3-68. Carriage Guide Shaft Gear Removal
Step 3: Disconnect the white, 2-pin, PG home sensor connector from the connector junction board
assembly.
Step 4: Detach the hook securing the PG home sensor and remove the sensor.
PG H om e Sensor
Platen G ap (PG ) M otor
Figure 3-69. PG Home Sensor Removal