Filter
Top Products
DFX-8500
Rev. B
3-5
8
ASSEMBLING POINT
When you install the front carriage guide shaft, tighten the screws while pushing the shaft toward the
platen.
ADJUSTMENT REQUIRED
When you assemble the carriage mechanism, perform the following adjustments:
• Carriage timing belt tension adjustment (described in Section 4.1.2)
• Carriage guide shaft parallelism adjustment (described in Section 4.1.5 and Section 4.1.6)
• Platen gap motor value (platen gap) adjustment (described in Section 4.1.7)
• Bidirectional printing adjustment (described in Section 4.1.8)