Filter
Top Products
DFX-8500
Rev. B
1-36
1.4.6 Initializations
1.4.6.1 Power-on Initialization
The initialization of this level is activated by power-on or /INIT signal (negative pulse) or cold-reset
command (remote RS command). This initialization is:
• to initialize the printer mechanism.
• to clear the all buffers of data.
• to cancel the download character definition.
• to make the printer stand-by state, if no errors occur.
• to execute software initialization.
1.4.6.2 Software Initialization
The initialization of this level is activated by the control code ESC @ for ESC/P or ESC [K for
IBM/LEXMARK2381 Plus. This initialization is:
• to make the printer setting to default.
1.4.6.3 Panel Initialization
The initialization performed by the control panel operation. This initialization is:
• to clear all data in the buffer.
• to execute software initialization.