Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
193
Using the Split 1 Set of Ribbon Panels option
Use this option to provide the most economical means of printing a dual-sided card since a
single set of ribbon Panels is essentially split to print both the front and backsides of a card.
Step Procedure
1 Select this option to automatically print full-color on the front of a card and resin
black on the back of a card (using either of the Full-color YMCK or YMCKK Print
Ribbons).
• If using a YMCK ribbon type, the front of the card is printed with the ribbon's
YMC Panels and the back is printed with the K Panel.
• If using a YMCKK ribbon type, the front of the card is printed with the YMCK
Panels and the back is printed with the second K Panel.
(Note #1: This option is automatically enabled when the YMCKK ribbon type is
selected.)
(Note #2: The Print Both Sides option is automatically enabled when this
option is selected.)
(Note #3: This option is not available if using a YMCKH or YMC Print Ribbon.)