![](http://pdfasset.owneriq.net/9/23/92325a4d-55d9-4fbd-8aab-c1db8502f09d/92325a4d-55d9-4fbd-8aab-c1db8502f09d-bgd8.png)
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
202
Using the Image color tab (continued)
Step Procedure
4 Control the amount of heat the Printer uses when printing with the resin black
Panel by adjusting the Resin Heat slide.
• Move the slide to the left to cause less heat to be used in the printing process,
causing resin images to be lighter or less saturated.
OR
• Move the slide to the right to cause more heat to be used, causing resin
images to be darker or more saturated.
(Note: This control can be helpful for fine-tuning the sharpness of resin text and
bar codes.)
Continued on the next page