Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
15
Technical Specifications (continued)
Term Description
Print Ribbon
Options
• Full color, YMC, 700 prints
• Full color with resin black, YMCK, 250 or 500 prints
• Full color with two resin black Panels, YMCKK, 400 prints
• Full color with resin black and heat seal Panel for difficult to print
surfaces, YMCKH, 400 prints; extra wide for over-the-edge
printing on CR-100 cards
All HDP ribbons utilize Fargo's exclusive RibbonTraq™ system for
maximum print quality, performance, reliability and ease of use.
Print Speed-Batch
Mode
• 35 seconds per card/112 cards per hour (YMC with transfer)
• 38 seconds per card/94 cards per hour (YMCK with transfer)
• 66 seconds per card/54 cards per hour (YMCKK with transfer)
• 40 seconds per card/90 cards per hour (YMCK/Lamination)*
• 72 seconds per card/50 cards per hour (YMCKK/Lamination)*
Resolution 300 dpi (11.8 dots/mm)
Software Drivers Windows 95/ 98/ ME/ NT/ 2000/XP.
Supply Voltage 100 to 240 VAC, 3.75A.
Supply Frequency 50 Hz/60 Hz.
System
Requirements
IBM-PC or compatible. Windows 95/ 98/ ME/ NT/ 2000/XP.
Pentium
™
class 133 MHz computer with 32 MB of RAM or higher,
200 MB free hard disk space or higher and ECP parallel port with
DMA access.
Warranty
Printer: One year; optional Extended Warranty Program (U.S.
only)
Printhead: Lifetime; unlimited pass
Weight
HDP820/825: 70 lbs. (31.8kg).
HDP820-LC/825-LC: 87 lbs./39.5kg
LC Module: 21 lbs./9.5 kg