FARGO electronic HDP820 Printer User Manual


 
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
13
Technical Specifications (continued)
Term Description
Display User-friendly, SmartScreen LCD Control Panel; LED display on
Card Lamination Module.
Encoding Options
ISO Magnetic Stripe Encoding Module, dual high- and low-
coercivity, Tracks 1, 2 and 3
JIS II Magnetic Stripe Encoding Module
E-card Docking Station (required for all e-card options or 3rd
party smart card encoding)
Contact Smart Card Encoder (ISO 7816), Parts 1-4; T=0 & T=1
Contactless Smart Card Encoder (MIFARE
®
)
Prox Card Encoder (HID read-only) (Note: Corporate Express
1000 Cards can be used with special order Weigand/ASCII
Converter)
Fargo Certified
Supplies
Fargo Card Printer/Encoders require highly specialized media to
function properly. To maximize printed card quality and durability,
printhead life and printer/encoder reliability, use only Fargo Certified
Supplies, Fargo warranties are void, where not prohibited by law,
when non-Fargo Certified Supplies are used.
HDP Film Options
Clear, 1,250 prints
Standard Holographic
Custom Holographic, special order
HDP Film Storage
Temperature
77ºF (25ºC) or lower for no longer than 1.5 years.
Humidity 20% to 80% Non-Condensing.
Input Hopper Card
Capacity
HDP820/HDP820-LC: 250 cards (.030"/.762mm)
HDP825/HDP825-LC: 200 cards (.030"/.762mm)
Interface
Centronics parallel, IEEE-1284 Compliant
Optional USB to Parallel Adaptor
Interfacing information for E-card Options
Continued on the next page