FARGO electronic HDP820 Printer User Manual


 
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
216
Selecting the Print YMC under the K and Print K Only options
Step Procedure
1 Use the Defined Area function.
a. Define an area by clicking on the Defined Area UP arrow. (Note: Another
.2" x .2" (5mm x 5mm) area will appear in the lower left-hand corner. This is
the location in which all newly defined areas will first appear. Up to 5 areas
can be defined.)
Additional areas cannot be added until the most recently created area
has been moved or sized. For this reason, size and position each area as
it is created.
Use the Defined Area arrows to navigate back and forth from area to
area. The active area will always be highlighted with a dotted outline.
b. Delete an area by using the Defined Area arrows to select the area and click
on the Delete button. (Note: If all areas are deleted, the K Panel Resin
options will automatically be deselected.)
2
Select the Print YMC Under K option to print all black in the designated areas
with the Yellow (Y), Magenta (M) and Cyan (C) ribbon Panels directly beneath
the resin black (K) Panel. (Note: Select this option if printing resin black text or
barcodes onto a colored background to provide a more gradual transition
between the two.)
OR
Select the Print K Only option to print all black in the designated areas only with
the resin black (K) Panel or to print resin black onto a white background to
maximize the sharpness of printed text and barcodes.
Continued on the next page