Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
40
Reviewing the Securing Latches and Lamination LED Light
Component Description Reference
Securing
Latches
Locks the Lamination Station securely in
place when closed.
See the Using the
Lamination tab (only with the
Card Lamination Module) in
Section 5, page 238.
Lamination
LED Light
The Lamination LED Light works in
conjunction with the Printer's LCD Display to
help communicate the Printer's current
status. The following explains how to
interpret the LED Light.
• Off: Indicates the Printer and
Lamination Module power is OFF.
• Solid Green light: Indicates the Card
Lamination Module is ready for
operation.
• Slow Flashing Green light: Indicates
the Lamination Module's (pause)
button was pushed and that the
Lamination Module is paused. This also
occurs when the Lamination Station is
open.
• Fast Flashing Green light: Indicates
the Lamination Module is in need of
attention due to an error or an error
condition. Refer to the Printer's LCD
Display for information.
See the the Reviewing LCD
Messages in Section 2, page
50.