Intel MPCMM0001 Network Card User Manual


 
148 MPCMM0001 Chassis Management Module Software Technical Product Specification
SNMP
44 cmmUpdate DisplayString write
Perform the CMM firmware update. The
set value is in the following format:
<cmm image location> ftp:<hostname
or IP address>:username:password.
45 cmmResetAirFilterRuntime INTEGER write
This allow the user to set the runtime to
zero when the filter is replaced. 1 -
reset, other value no change.
46 cmmAirFilterRunTimeLimit DisplayString read-write
Returns the upper critical limit. Refer to
CLI section for more info.
47 cmmSyncuserledstate DisplayString read-write
Get/Set whether the LED state is
synced between the active and the
standby CMM. “Yes” or “No”.
48 cmmLoginMessage DisplayString read-write
Used to customize the login screen
message by allowing the user to add
the OEM name.
49 cmmCmdLinePrompt DisplayString read-write
Used to customize the bash prompt by
allowing the user to add the OEM
name.
50 standbyCMMReboot INTEGER read-write
Used to reboot the standby CMM. 1 -
Reboot
55 cmmIPMICommandRequest DisplayString read-write
Used to send any IPMI command to this
location.
56 cmmIPMICommandResponse DisplayString read-only
Used to read the response to the above
IPMI command.
57 cmmFailoverOnRedundancy DisplayString read-write
Get/Set of the failover on redundancy
flag.Settable values are: 'automatic' or
'manual'
58 cmmSyncUserScripts DisplayString read-write
Get/Set the User Scripts
Synchronization flag.Settable values
are: 'equal' or 'upgrade' or 'downgrade'
or 'always'"
59 cmmTemperatureLevel DisplayString read-only
Used to get the temperature level of the
system.
62 cmmSNMPTrapFormat INTEGER read-write
Get/Set SNMP trap format.
1 - text, 2 - raw, 3 - text + raw
63
cmmSNMPSendUnrecognized
Events
INTEGER read-write
Get/Set
SNMPSendUnrecognizedEvents.
0 - disable, 1 - enable
64 cmmSELFormat INTEGER read-write
Get/Set SEL format.
1 - text, 2 - raw, 3 - text + raw
65
cmmSELDisplayUnrecognized
Events
INTEGER read-write
Get/Set
SELDisplayUnrecognizedEvents.
0 - disable, 1 - enable
Table 63. Cmm Location (1.3.6.1.4.1.343.2.14.2.10.3) (Sheet 3 of 3)
OID Object Syntax Access Value