Filter
Top Products
MPCMM0001 Chassis Management Module Software Technical Product Specification 157
SNMP
25
[fanTray/
pem]fruProductDescription
DisplayString read-only
Used to read the Product Description
from the FRU.
26
[fanTray/
pem]fruProductManufacturer
DisplayString read-only
Used to read the Product
Manufacturer from the FRU.
27
[fanTray/
pem]fruProductPartNumber
DisplayString read-only
Used to read the Product Part
Number from the FRU.
28
[fanTray/
pem]fruProductSerialNumber
DisplayString read-only
Used to read the Product Serial
Number from the FRU.
29
[fanTray/
pem]fruProductManufactureDate
DisplayString read-only
Used to read the Product
Manufacture Date from the FRU.
30 [fanTray/pem]fruProductModel DisplayString read-only
Used to read the Product Model from
the FRU.
31 [fanTray/pem]fruProductRevision DisplayString read-only
Used to read the Product Revision
from the FRU.
32 [fanTray/pem]EventAction
OCTET
STRING
read-write
Used to associate a script to a
particular event.
Table 74. [FanTray/pem]FruTable/[fanTray/pem]FruEntry (1.3.6.1.4.1.343.2.14.2.10.[5/6].53.1)
OID Object Syntax Access Value
1 [fanTray/pem]Number INTEGER none index 1
2 [fanTray/pem]FruNumber INTEGER none index 2
3
[fanTray/
pem]FruShelfManagerControlled
Activation
INTEGER read-write
Get/Set whether the Shelf Manager
activates the FRU or not. none(0),
activate(1).
4 [fanTray/pem]FruHotSwapState DisplayString read-write
The hot swap state as read from the
FRU and the CMM's internally
known hot swap state.
5 [fanTray/pem]FruLedProperties DisplayString read-only
Find out what LEDs the FRU
supports.
6 [fanTray/pem]FruPowerLevels DisplayString read-only
Returns the power levels available
for a FRU and the number of watts
drawn by each.
7
[fanTray/
pem]FruPresentPowerLevel
DisplayString read-write Get/Set the power level of an entity.
8 [fanTray/pem]FRUActivation INTEGER read-write
Get/Set the activation state to either
activate or deactivate the FRU. The
Deactivate is the same as a
Graceful Shutdown.
9
[fanTray/
pem]FRUActivationPolicy
INTEGER read-write
Get/Set the locked bit of the
activation policy.
10 [fanTray/pem]FRUControl INTEGER write-only
Set the FRU to do things like Cold
Reset, Warm Reset, etc. See the
AdvancedTCA specification for
possibilities.
11
[fanTray/
pem]FRUDeactivationPolicy
INTEGER read-write Get/Set FRU Deactivation Policy.
Table 73. [FanTray/pem]TargetTable/[fanTray/pem]TargetEntry (1.3.6.1.4.1.343.2.14.2.10.[5/
6].52.1) (Sheet 2 of 2)
OID Object Syntax Access Value