Filter
Top Products
152 MPCMM0001 Chassis Management Module Software Technical Product Specification
SNMP
4
cmmPmsEscalationActio
n
DisplayString read-write
The process escalation action defines how
a faulty process that fails to restart will be
recovered. Possible values: 1-No Action, 2-
Failover and Reboot.
5 cmmPmsProcessName DisplayString read-only
Display the monitored process' name and
its associated command line arguments.
6 cmmPmsOpState DisplayString read-only
Display the operational state. An
operational state of disabled indicates that
the process is faulty but cannot be
recovered. Possible values: 1-Enabled, 2-
Disabled.
7 cmmPmsHealth INTEGER read-only
Health information about a particular
monitored process. Possible values: 0-OK,
1-Minor, 2-Major, 3-Critical.
8 cmmPmsHealthEvents DisplayString read-only
Display the monitored process' health
events.
Table 68. Blade# Location (1.3.6.1.4.1.343.2.14.2.10.4.[1-16])
OID Object Syntax Access Value
1 b#GrantedBoardEKeys DisplayString read-only E keys
2 b#FRUExtractionNotify INTEGER write
Used to notify that a FRU has been
extracted from the shelf. Value = “1”
3 b#PICMGProperties DisplayString read-only The version Information.
4 b#DeviceID DisplayString read-only Device ID
6 b#Powerstate INTEGER read-write
The power state of a blade. This is used to
find out if a blade is present, healthy, on/off
or to reboot, shutdown and turn on a
blade. reset - Reset a blade poweron -
Power on a blade poweroff - Power off a
blade offline - Set the blade in the offline
mode activate - set the board in active
mode.
7 b#Presence INTEGER read-only
Used to find out if a location is present in
the chassis. 0 - Not present, 1 - Present.
8 b#ListTargets DisplayString read-only
Used to find out what targets are available
on a location (e.g., Getting the list of
sensors in the chassis).
9 b#ListDataItems DisplayString read-only
Used to find out what data items are
available on a target or location.
10 b#Health INTEGER read-only
Health information about a particular
location. This will be one of the following:
(0-OK, 1-Minor, 2-Major, 3-Critical).
11 b#HealthEvents DisplayString read-only
Events that contribute to the health of the
location. This is a list of events happening
on the location.
Table 67. CmmPmsTable/cmmPmsEntry (1.3.6.1.4.1.343.2.14.2.10.3.54.1) (Sheet 2 of 2)
OID Object Syntax Access Value