178 MPCMM0001 Chassis Management Module Software Technical Product Specification
Remote Procedure Calls (RPC)
34
E_IMB_COMPCODE_ERROR
An IPMI request returned with a non
successful completion code. User should
try the command again.
35
E_IMB_INVALID_PACKET
Invalid IPMI response. Blade may be
returning invalid data.
36
E_IMB_INVALID_REQUEST
Invalid IPMI response. Blade may be
returning invalid data.
37
E_IMB_RESPONSE_DATA_OVERFLOW
Invalid IPMI response. Blade may be
returning invalid data.
38 E_IMB_DATA_COPY_FAILED Internal CMM Error
39 E_IMB_INVALID_EVENT Internal CMM Error
40 E_IMB_OPEN_DEVICE_FAILED Internal CMM Error
41 E_IMB_MMAP_FAILED Internal CMM Error
42 E_IMB_MUNMAP_FAILED Internal CMM Error
43
E_IMB_RESP_LEN_ERROR
Invalid IPMI response. Blade may be
returning invalid data.
44
E_NEM_SNMPTRAP_ERROR
Error setting snmp trap parameters. Retry
command
45 E_NEM_SYSTEMHEALTH_ERROR Internal CMM Error.
46 E_NEM_GETHEALTH_ERROR Internal CMM Error.
47 E_NEM_SNMPENABLE_ERROR Internal CMM Error.
48 E_NEM_SENSOR_HEALTH_ERROR Internal CMM Error.
49 E_NEM_FILTER_SEL_ERROR Internal CMM Error.
50 E_NEM_INITIALIZE_ERROR Internal CMM Error.
51 E_NEM_SENSOR_EVENT Internal CMM Error.
52 E_NEM_SENSOR_ERROR Internal CMM Error.
53 E_NEM_SNMP_PROCESS_EVENT_ERROR Internal CMM Error.
54
E_NEM_SNMP_DEST_ADDR_ERROR
SNMP Trap address that the user is setting
is invalid.
55
E_NEM_SNMP_COMMUNITY_STRING_ERROR
SNMP Community that user is setting is
invalid.
56
E_NEM_SNMP_TRAP_VERSION_ERROR
SNMP Trap version that the user is setting
is invalid.
57
E_NEM_SNMP_TRAP_PORT_ERROR
SNMP Trap port that the user is setting is
invalid.
58
E_NEM_SNMP_CFG_ERROR
Cannot read SNMP config parameter.
Config file may be corrupted.
59 E_NEM_SEND_SNMP_TRAP_ERROR Internal CMM Error.
60 E_SFS_INVALID_TRANSACTION Internal CMM Error.
61
E_SFS_LOCK_SDR
Can't read SDRs. Blade may be busy, try
again.
62 E_SFS_ENTITY_ID Internal CMM Error.
63 E_SFS_DEVICE_LOCATOR_NULL Internal CMM Error.
Table 80. Error and Return Codes for the RPC Interface (Sheet 2 of 4)
Code #: Error Code String Error Code Description