Filter
Top Products
156 MPCMM0001 Chassis Management Module Software Technical Product Specification
SNMP
19 fanTrayMaximumSetting DisplayString read-only The fantray's maximum setting.
20 fanTrayRecommendedSetting DisplayString read-only The fantray's recommended setting.
21 fanTrayCurrentFanLevel DisplayString read-only The fantray's current fan level.
Table 73. [FanTray/pem]TargetTable/[fanTray/pem]TargetEntry (1.3.6.1.4.1.343.2.14.2.10.[5/
6].52.1) (Sheet 1 of 2)
OID Object Syntax Access Value
1 [fanTray/pem]Number INTEGER none Index 1
2 [fanTray/pem]Target DisplayString none Index 2
3 [fanTray/pem]Current DisplayString read-only The current value of a sensor.
4 [fanTray/pem]ThresholdsAll DisplayString read-only All thresholds of a sensor.
5 [fanTray/pem]UpperCritical DisplayString read-only Upper critical thresholds
6 [fanTray/pem]UpperNonCritical DisplayString read-only Upper non-critical thresholds
7 [fanTray/pem]LowerNonCritical DisplayString read-only Lower non-critical thresholds
8 [fanTray/pem]LowerCritical DisplayString read-only Lower critical thresholds
9
[fanTray/
pem]UpperNonRecoverable
DisplayString read-only Upper non recoverable thresholds
10
[fanTray/
pem]LowerNonRecoverable
DisplayString read-only Lower non recoverable thresholds
14 [fanTray/pem]SensorHealth INTEGER read-only
Health information about a particular
location/sensor. This will be one of
the following: (0-OK, 1-Minor, 2-
Major, 3-Critical).
15
[fanTray/
pem]SensorHealthEvents
DisplayString read-only
Events that contribute to the health
of the location/sensor. This is a list of
events happening on the location.
16 [fanTray/pem]MinorAction
OCTET
STRING
read-write
Used to configure user defined
actions when minor events occur.
17 [fanTray/pem]MajorAction
OCTET
STRING
read-write
Used to configure user defined
actions when major events occur.
18 [fanTray/pem]CriticalAction
OCTET
STRING
read-write
Used to configure user defined
actions when critical events occur.
19 [fanTray/pem]NormalAction
OCTET
STRING
read-write
Used to configure user defined
actions when normal events occur.
20
[fanTray/
pem]fruBoardDescription
DisplayString read-only
Used to read the Board Description
from the FRU.
21
[fanTray/
pem]fruBoardManufacturer
DisplayString read-only
Used to read the Board
Manufacturer from the FRU.
22
[fanTray/
pem]fruBoardPartNumber
DisplayString read-only
Used to read the Board Part Number
from the FRU.
23
[fanTray/
pem]fruBoardSerialNumber
DisplayString read-only
Used to read the Board Serial
Number from the FRU.
24
[fanTray/
pem]fruBoardManufactureDate
DisplayString read-only
Used to read the Board Manufacture
Date from the FRU.
Table 72. [FanTray/pem]Table/[fanTray/pem]Entry (1.3.6.1.4.1.343.2.14.2.10.[5/6].51.1)
OID Object Syntax Access Value