Intel MPCMM0001 Network Card User Manual


 
MPCMM0001 Chassis Management Module Software Technical Product Specification 155
SNMP
Table 71. Blade#FruTargetTable/blade#FruTargetEntry (1.3.6.1.4.1.343.2.14.2.10.4.[1-16].53.1)
OID Object Syntax Access Value
1 b#FruNumber INTEGER none Index 1
2 b#Target DisplayString none Index 2
3 b#FruLedColorProps DisplayString read-only
Finds out what colors are supported
by the LED.
4 b#FruLedState DisplayString read-write Get/Set the FRU LED state.
Table 72. [FanTray/pem]Table/[fanTray/pem]Entry (1.3.6.1.4.1.343.2.14.2.10.[5/6].51.1)
OID Object Syntax Access Value
1 [fanTray/pem]Number INTEGER none index
2 [fanTray/pem]FRUExtractionNotify INTEGER write
Used to notify that a FRU has been
extracted from the shelf. Valid value:
1
3 [fantray/pem]TotalFrus DisplayString read-only Display the total number of FRUs.
4 [fanTray/pem]PICMGProperties DisplayString read-only The version Information.
5 [fanTray/pem]DeviceID DisplayString read-only
6 [fanTray/pem]Presence INTEGER read-only
Used to find out if a location is
present in the chassis. 0 - Not
present, 1 - Present
7 [fanTray/pem]ListTargets DisplayString read-only
Used to find out what targets are
available on a location (e.g., getting
the list of sensors in the chassis).
8 [fanTray/pem]ListDataItems DisplayString read-only
Used to find out what data items are
available on a target or location.
9 [fanTray/pem]Health INTEGER read-only
Health information about a particular
location. This will be one of the
following: (0-OK, 1-Minor, 2-Major, 3-
Critical).
10 [fanTray/pem]HealthEvents DisplayString read-only
Events that contribute to the health
of the location. This is a list of events
happening on the location.
11
[fanTray/
pem]IPMICommandRequest
DisplayString read-write
Used to send any IPMI command to
this location.
12
[fanTray/
pem]IPMICommandResponse
DisplayString read-only
Used to read the response to the
above IPMI command.
13 fanTrayMinorLevel DisplayString read-write
The cooling to be used when at the
minor level.
14 fanTrayNormalLevel DisplayString read-write
The cooling to be used when at the
minor level.
15 fanTrayControl DisplayString read-write The fantray's control mode.
16 fanTrayDefaultControl DisplayString read-write The fantray's default control mode.
17 fanTrayRestoreDefaults DisplayString write-only
Restore the fantray's control mode to
the default setting.
18 fanTrayMinimumSetting DisplayString read-only The fantray's minimum setting.