Intel MPCMM0001 Network Card User Manual


 
268 MPCMM0001 Chassis Management Module Software Technical Product Specification
Safety Warnings
Warning: Avoid electric shock: Do not operate in wet, damp, or condensing conditions. To avoid
electric shock or fire hazard, do not operate this product with enclosure covers or panels removed.
Warning
: Avoid electric shock: For units with multiple power sources, disconnect all external
power connections before servicing.
Warning
: Power supplies must be replaced by qualified service personnel only.
Caution
: System environmental requirements: Components such as Processor Boards, Ethernet
Switches, etc., are designed to operate with external airflow. Components can be destroyed if they
are operated without external airflow. External airflow is normally provided by chassis fans when
components are installed in compatible chassis. Never restrict the airflow through the unit's fan or
vents. Filler panels or air management boards must be installed in unused chassis slots.
Environmental specifications for specific products may differ. Refer to product user manuals for
airflow requirements and other environmental specifications.
Warning
: Device heatsinks may be hot during normal operation: To avoid burns, do not allow
anything to touch heatsinks.
Warning
: Avoid injury, fire hazard, or explosion: Do not operate this product in an explosive
atmosphere.
Caution
: Lithium batteries. There is a danger of explosion if a battery is incorrectly replaced or
handled. Do not disassemble or recharge the battery. Do not dispose of the battery in fire. When the
battery is replaced, the same type (CR2032) or an equivalent type recommended by the
manufacturer must be used. Used batteries must be disposed of according to the manufacturer's
instructions.
Warning
: Avoid injury: This product may contain one or more laser devices that are visually
accessible depending on the plug-in modules installed. Products equipped with a laser device must
comply with International Electrotechnical Commission (IEC) 60825.
33.1 Mesures de Sécurité
AVERTISSEMENT CONCERNANT LA SÉCURITÉ DE L'ALIMENTATION C.A. ET/OU
C.C. : le câble d'alimentation C.A. et/ou C.C. constitue le dispositif de déconnexion principal de
l'alimentation électrique de l'unité et doit être facilement accessible à tous moments. Les
commutateurs de marche/arrêt C.A. et/ou C.C. et/ou les commutateurs disjoncteurs auxiliaires
permettent uniquement de contrôler l'alimentation (ET NON LA DÉCONNEXION
PRINCIPALE).
IMPORTANT
: reportez-vous aux instructions d'installation avant de connecter le bloc
d'alimentation.
Veuillez suivre les mesures de sécurité suivantes pour éviter tout accident corporel et ne pas
endommager ce produit ou tout autre produit lui étant connecté. Pour éviter tout danger, veillez à
utiliser le produit conformément aux spécifications mentionnées.
Lisez toutes les informations de sécurité fournies dans les manuels de l'utilisateur des produits
composants et veillez à bien comprendre les mesures associées aux symboles de sécurité, aux
avertissements écrits et aux mises en garde avant d'accéder à certains éléments ou emplacements de
l'unité. Conservez ce document comme outil de référence.