Filter
Top Products
92 MPCMM0001 Chassis Management Module Software Technical Product Specification
The Command Line Interface (CLI)
standbycmmreboot
Used to request to reboot the
standby CMM from the active
CMM.
Set N/A
1 - Request to
reboot the standby
CMM
feedcount
Get the power feed count for
that location. Determines
number of feed targets (i.e.,
feed1) for that location. See
Section 7.7, “Power Feed
Targets” on page 69.
Get Integer number N/A
failoveronredundancy
Used to set the failover
configuration flag
Both automatic, manual automatic, manual
syncuserscripts
Used to set the direction of
synchronization for home
scripts when the CMM
versions differ.
Both
“upgrade”, “downgrade”, “always”,
“equal”
upgrade,
downgrade, always,
equal
snmptrapformat
Uset to get/set SNMP trap
format
Both
“1” - text
“2” -raw
“3”-text+raw
“1” - text
“2” - raw
“3” - text+raw
snmpsendunrecogniz
edevents
Used to get/set the option if to
send unrecognized events.
Used only when
snmptrapformat is set to 1.
Both
0 - don't send
1 - send
“0” - don't send
“1” - send
selformat
Used to get/set the option if to
send unrecognized events.
Used only when
snmptrapformat is set to 1.
Both
“0” - don't send
“1” - send
“0” - don't send
“1” - send
seldisplayunrecogniz
edevents
Used to get/set the option if to
display unrecognized events
in SEL. Used only when
selformat is set to 1.
Both
“0” - don't display
“1” - display
“0” - don't display
“1” - display
temperaturelevel
Used to query the current
temperature level of the
fantray.
Get “Normal”, “Minor”, “Major”, “Critical” N/A
Table 28. Dataitem Keywords for System Location
dataitem Description
Get/
Set
CLI Get Output Valid Set Values
unhealthylocations
Used to query which
locations have active health
events
Get
"Critical : CritList
Major : MajList
Minor : MinList"
where each list is a list of locations
having that level of health events
(space separated)
N/A
clearmajor
Clear major alarm LED on
the active CMM.
Set N/A
1 - Only accepts a
value of 1
clearminor
Clear minor alarm LED on
the active CMM.
Set N/A
1 - Only accepts a
value of 1
Table 27. Dataitem Keywords for Cmm Location (Sheet 7 of 7)
dataitem Description
Get/
Set
CLI Get Output Valid Set Values