MPCMM0001 Chassis Management Module Software Technical Product Specification 67
Process Monitoring and Integrity
6.11 WP/BPM PIE
The command line usage of PmsPieWp is:
PmsPieWp [-s] [-d[NumberOfDynamicWrappersPerRun]] [-f SuccessiveFailureNumber]
where:
-s: check static wrappers (optional)
-d: check dynamic wrappers and bpm threads (optional)
Number of dynamic wrappers and bpm threads to check on each run (optional)
Values: 0 - 100. Default : 0 = process all dynamic wrappers and bpm threads on each execution.
-f: Successive Failure Number - This is the number of allowed successive integrity failures before
the PMS performs recovery on the faulting process. PMS performs recovery on "this number + 1".
Values: 1 - 100. Default = 3
Example:
PmsPieWp -s -f2 - check static wrappers
PmsPieWp -d0 -f2 - check all dynamic wrappers and all BPM threads
PmsPieWp -s -d0 -f2 - Check static and all dynamic wrappers all BPM
threads
PmsPieWp -s -d10 -f2 - Check static and 10 dynamic wrappers and BPM
threads
PmsPieWp -s -d10 -f 2 - Check static and 10 dynamic wrappers and BPM
threads
6.11.1 WP/BPM Section of pms.ini
[PmsPie180]
ProcessIntegrityExecutable = ./PmsPieWp -s -d0 -f2
UniqueID = 180
AdminState = 1
ProcessIntegrityInterval = 300