Intel MPCMM0001 Network Card User Manual


 
MPCMM0001 Chassis Management Module Software Technical Product Specification 197
RMCP
[Net Function1..n]: TheIPMI Net Function in hex of the corresponding command.
[Net Function Name 1..n]: The name used to identify its corresponding subsection.
Y: The max number of commands defined in the subsection plus 1.
[Command Bye 1..(Y-1)]: The command byte of the Net Function defined in this section.
Privilege Level: The privilege given to that command byte defined as follows:
C: Callback, callback only
U: User, browse only
O: Operator, can change state
A: Admin, can change transport
D: Disabled, no access
20.10.1 Sample cmdPrivillege.ini file
[IPMI]
NumNetFunc=23
NetFunc00=Chassis
NetFunc02=Bridge
[Chassis]
NumCMD=16
00=U
01=U
02=O
03=O
04=O
05=A
20.11 Completion Codes for the RMCP Messages
The following table lists the completion codes for RMCP Messages. Please refer to the IPMI 1.5
Specification for more detail.