Filter
Top Products
70 MPCMM0001 Chassis Management Module Software Technical Product Specification
Power and Hot Swap Management
7.8 Pinging IPMI Controllers
The following lists the values of time to delay and number of pings that the CMM uses to
determine the state of a FRU.
Table 18. Time to Delay and Number of Attempts
Variable Description Value
DelayBetweenPingLoops
The number of microseconds to delay between
each ping loop. This is essentially the amount of
time from the ping of the last IPMI Controller in
the list to the ping of the first controller in the list.
10000000
(10 seconds)
DelayBetweenIPMControllerPings
The number of microseconds of delay between
the ping on one controller that is in the list and
the ping of the next one on the list. This delay
does not apply after the last controller in the list.
0
NumberFailedAttemptsBeforeAlert
How many failed attempts to contact the IPMI
Controller must occur prior to raising an event
that communication has been lost.
3