Filter
Top Products
78 MPCMM0001 Chassis Management Module Software Technical Product Specification
The Command Line Interface (CLI)
8.4.4 Target Parameter: -t
The Target parameter is the sensor or variable that the cmmget or cmmset acts on. If target is
not given then it is assumed that dataitem is an attribute of location. An example of this is
presence. To obtain a list of valid targets for a device, issue the following command:
cmmget [-l location] -d listtargets
Where location is the device for which you want to obtain a list of targets.
The target parameter for plug-in boards and different chassis components is defined by the sensor
name in the Sensor Data Record (SDR) for that device. The various boards, fantrays, and PEMs
provide their own SDRs automatically.
chassis Chassis specific information.
fantrayN
The system fantray where N is the number of the fantray. For example,
fantray1 refers to the single fantray in the MPCHC0001 shelf.
NOTE: fantray1 may also be referred to as blade15 in a 14 slot chassis or
blade17 in a 16 slot chassis.
PEM1
PEM2
The system Power Entry Modules. PEM1 is in the left slot when looking
from the front of chassis and PEM2 is in the right slot.
NOTE: PEM1 may also be referred to as blade16 and PEM2 as blade17 in
a 14-slot chassis; correspondingly they can be referred to as
blade18 and blade19 in a 16-slot chassis.
Table 21. Location (-l) Keywords
Keyword Function