Filter
Top Products
If any part is missing, contact a customer service representative.
A fully configured router contains the router chassis with installed components, listed
in Table 20 on page 39, and an accessory box, which contains the parts listed in
Table 21 on page 39. The parts shipped with your router can vary depending on the
configuration you ordered.
Table 20: Parts List for a Fully Configured Router
QuantityComponent
1Chassis, including midplane, craft interface, and
rack-mounting brackets
Up to 3DPCs
1 or 2Routing Engines
1 or 2SCBs
1 or 2DC power supplies
1 or 2AC power supplies (220 V)
2 or 4AC power supplies (110 V)
1Fan tray
1Air filter
1Air filter tray
1Quick start installation instructions
1Mounting shelf
One blank panel for each slot not
occupied by a component
Blank panels for slots without components installed
Table 21: Accessory Box Parts List
QuantityPart
22Screws to mount chassis and small shelf
5DC power terminal Lugs, 6-AWG
1RJ-45-to-DB-9 serial cable to connect the router through
the serial port
2Cable manager brackets
2Terminal block plug, 3–pole, 5.08 mm spacing, 12A, to
connect the router alarms
Verifying Parts Received ■ 39
Chapter 5: Unpacking the Router