Filter
Top Products
Making Printer Settings Using the Control Panel
136
❒ Only the installed trays appear on the display panel.
❖ Plain Paper
You can specify plain paper for each tray.
•Tray 1
•Tray 2
•Tray 3
• Bypass Tray
❒ Default: Normal
❖ Maint. Reset
Maintenance Reset allows the user to reset the counters of each internal unit,
such as the Transfer Belt and Fusing Unit. These counters can be reset at an-
ytime, but must be reset when a unit is reinstalled.
For details about resetting internal units, see "Replacing Consumables",
Maintenance Guide.
❖ HD Format
You can format the hard disk when the optional hard disk is installed.
For details about formatting the hard disk, see “Attaching Printer Hard Disk
Type 3000”, Setup Guide.
❖ 4C.Graphic Mode
This mode adjusts levels of toner color overlap. If characters or lines blur, se-
lecting [Text Priority] may make them clearer. Select [Photo Priority] for normal
use.
❒ Default: Photo Priority
❖ Replacmnt Alert
Use this function to specify when to warn the user about replacing supplies.
• Notify Sooner
•Normal
•Notify Later
❒ Default: Normal
❖ WL.LAN Signal
You can check the signal strength when using wireless LAN.