Filter
Top Products
Using a Printer Server
237
❒ When creating a queued print server in a pure IP environment of NetWare
5/5.1 or NetWare 6.0, create a print queue on the file server using NetWare
Administrator.
❒ This printer is not available as a remote printer for use in a pure IP environ-
ment.
❒ To use the printer in a pure IP environment, set it to TCP/IP.
Setting up using NIB Setup Tool
A Log on to the file server as an administrator or administrator equivalent.
B Start NIB Setup Tool on the [Start] menu.
C Click [Property Sheet], and then click [OK].
D Select a printer you want to configure.
E On the [NetWare] tab, Select [File Server Mode] or [NDS mode] in the [Logon
Mode] area.
When [File Server Mode] is selected, the network connection is established
based on the string entered in the [File Server Name(F):] box.
When [NDS mode] is selected, the network connection is established based on
the string entered in the [NDS Tree:] box.
F In the [Print Server Name] box, enter the name of the print server.
G In the [File Server Name] box, enter the name of the file server in which a
print server is created.
You can also click [Browse] to browse through available file servers.
H Enter the NDS tree name in the [NDS Tree:] box.
Enter up to 32 alphanumeric characters. Hyphens and underscores can also
be used.
I In the [NDS Context:] box, enter the context of the print server.
You can also click [Browse] to browse through available NDS trees and NDS
contexts.
For a context, object names are entered from the lowest object with each ob-
ject separated by a period. For example, if you want to create a print server in
Net under DS, enter “NET.DS”.