Filter
Top Products
Troubleshooting
89
It takes too much time to resume
printing.
The data is so large or complex that it takes time to process
it. If the Data In indicator is blinking, the data is being pro-
cessed. Just wait until it resumes.
If OHP transparencies or glossy paper is being used, printing
takes more time to start.
It takes too much time to com-
plete the print job.
Photographs and other data intensive pages take a long time
for the printer to process, so simply wait when printing such
data.
Changing the settings with printer driver may help to speed
up printing.
See the printer driver Help.
The data is so large or complex that it takes time to process
it. If the Data In indicator is blinking, the data is being pro-
cessed. Just wait until it resumes.
If [Waiting...] appears on the display, the printer is now warm-
ing up. Wait for a while.
Images are cut off, or excess
pages are printed.
If you are using paper smaller than the paper size selected in
the application, use the same size paper as that selected in
the application. If you cannot load paper of the correct size,
use the reduction function to reduce the image, and then
print.
See the printer driver Help.
The color of the printout is differ-
ent from the color on the com-
puter's display.
The colors made using color toner are different from colors
displayed on the display in its production system.
When [Toner Saving] is checked under the [Print Quality] tab in
the printer driver's dialog box, the color gradation may ap-
pear differently.
See the printer driver Help.
The color of the printout is differ-
ent from the color specified.
If a specific color is missing, turn the power switch off and on.
If this does not solve the problem, contact your sales or ser-
vice representative.
Color changes extremely when
adjusted with the printer driver.
Do not extreme settings for the color balance under the [Print
Quality] tab in the printer driver's dialog box.
See the printer driver Help.
Photo images are coarse. Some applications lower the resolution for making prints.
Color documents are printed in
black and white.
The printer driver is not set up for color printing.
See the printer driver Help.
Some applications print color files in black and white.
Fine dot pattern does not print. Change the [Dithering:] setting in the printer driver's dialog
box.
See the printer driver Help.
Status Possible Causes, Descriptions, and Solutions