Filter
Top Products
Monitoring and Configuring the Printer
227
inetd start. The inetd service has started.
IPP cancel-job: permission denied. The printer could not authenticate the name of
the user attempting to cancel a job.
ipp disable. Printing with ipp is disabled.
ipp enable. Printing with ipp is enabled.
IPP job canceled. jobid=%d. The spooled job was canceled due to error or
user request.
LeaseTime=<lease time>(sec), Renew-
Time=<renew time>(sec).
The resource lease time received from the
DHCP server is displayed in [lease time] in
seconds. The renewal time is displayed in [re-
new time] in seconds.
Login to fileserver <file server name>
(<IPX|IP>,<NDS|BINDERY|NDS|BINDERY>)
(In the print server mode) Login to the file serv-
er is in the NDS or BINDERY mode.
multid start. Data transmission service for multiprotocols
has started.
nbstart start. (NetBEUI) The service for NetBEUI protocol stack setting
has started.
NBT Registration Broadcast(<NetBIOS
name>)
Use a local broadcast to map the NetBIOS
name with the IP address.
nbtd start. The nbtd service has started (available only in
the DHCP mode).
NetBEUI Computer Name =<computer name> The NetBEUI computer name is specified.
nmsd start. (NetBEUI) The nmsd (Name Server Daemon) service has
started.
npriter start. (NetWare) (In the remote printer mode) The NetWare
service has started.
nwstart start. (NetWare) The service for NetWare protocol stack setting
has started.
Open log file <file name> (In the print server mode) The specified log file
has been opened.
papd start. (AppleTalk) The AppleTalk print service has started.
phy release file open failed. Replacing the network interface board is re-
quired. Contact your sales or service repre-
sentative.
Print queue <print queue name> cannot be
serviced by printer 0, <print server name>
(In the print server mode) The print queue can-
not be established. Make sure that print queue
exists on the specified file server.
Print server <print server name>has no printer. (In the print server mode) The printer is not as-
signed to the print server. Using NWadmin, as-
sign the printer, and then restart it.
print session full No more print jobs can be accepted.
Message Problem and solutions