Filter
Top Products
Installing Options
50
J Connect the paper feed unit cable securely to the socket inside the print-
er.
To connect two paper feed units, connect the paper feed unit cable securely
to the socket inside the paper feed unit
❒ Before using the new paper feed unit, you must make settings in the printer
driver.
❒ When moving or transporting the printer, make sure to unplug the paper
feed unit connector. For more information, see “Moving and Transporting
the Printer” in the Maintenance Guide.
❒ When moving the printer, remove the paper feed unit.
❒ After finishing installation, check the paper feed unit is installed properly:
print the configuration page from the “List/Test Print” menu. If it is installed
properly, you will see “Tray 2” or “Tray 2, Tray 3” for “Options”.
❒ If the paper feed unit is not installed properly, reinstall it from the start of
the procedure. If you cannot install it properly even after attempting rein-
stallation, contact your sales or service representative.
For details about printing the configuration page, see p.40 “Test Printing”.
See “Loading Paper”, Maintenance Guide.