Filter
Top Products
Installing Options
64
❒ After finishing installation, check the printer hard disk is installed properly:
print the configuration page from the “List/Test Print” menu. If it is installed
properly, you will see “Printer Hard Disk Drive” for “Controller Option”.
❒ If the printer hard disk is not installed properly, reinstall it from the start of
the procedure. If you cannot install it properly even after attempting rein-
stallation, contact your sales or service representative.
For details about printing the configuration page, see p.40 “Test Printing”.
Formatting the Printer Hard Disk
If it becomes necessary to format the printer hard disk after initial setup, execute
[HD Format] in the [Maintenance] menu.
❒ Formatting the printer hard disk will delete all data.
A Press the {Menu} key.
The [Menu] screen appears.
B Press the {U} or {T} key to display [Maintenance], and then press the {#
Enter} key.
The menu for selecting [Maintenance] items appears.
C Press the {U} or {T} key to display [HD Format], and then press the {# En-
ter} key.
A check message appears.
Menu:
Maintenance