Filter
Top Products
Antistatic Protection
101
Accessories
Attention
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.
Antistatic Protection
Attention
It’s very important to protect the printer controller board and any
associated daughterboard or module from electrostatic damage while
performing any task involving the controller board.
If an antistatic wrist strap is provided in your printer option kit, attach
one end of it to your wrist and the other end to any convenient electrical
ground (for example, the bare metal chassis of equipment, as on the
back of a computer, that is plugged in but turned off). Never attach the
wrist strap to any piece of equipment with an electrical current present.
Turn off all power switches first. Plastic, rubber, wood, painted metal
surfaces, and telephones are not acceptable grounding points. The
printer isn’t an acceptable grounding point either because it must be
unplugged before you perform this task. If you don’t have an antistatic
wrist strap, discharge your body’s static electric charge by touching a
grounded surface before you handle any printer boards or components
and before removing the controller board. Also avoid walking around
after grounding yourself.
BuzzBox
BuzzBox is a printer accessory that warns you with a buzzer and/or a blinking
light any time the printer goes off line. This means you’re alerted to print job
interruptions, such as empty media trays or other consumable issues.
SC-210
Convenience copier with optional automatic
documnet feeder
Time-of-Day Clock
Time stamps jobs in accounting files, and header
and trailer pages
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500