Filter
Top Products
Automatic Jam Recovery
53
Automatic Jam Recovery
The magicolor
2210 provides automatic jam recovery (when enabled through
the Administration/Engine/Page Recovery menu). After you remove any
jammed media, printing automatically resumes from the page the printer
stopped at when the jam occurred.
5"
For automatic jam recovery to work, it is necessary to leave the printer
turned on when you remove the jammed media.
You always adjust the media width
regulation guides in the multipur-
pose tray
after
inserting the media
(
a guide that is not properly
adjusted can cause poor print qual-
ity, paper jams, or printer damage)
Allowing the
output
tray to overfill
(
the face-down output tray has a
500-sheet capacity—jamming may
occur if you allow media to accumu-
late more than 500 sheets at a time
)
You remove transparencies from
the output tray immediately to avoid
static buildup.
You load the media (for single-sided
pages) printing-side up in the upper
or optional trays or printing-side
down in the multi-
purpose tray (m
any manufacturers
place an arrow on the end of the
wrapper to indicate the printing
side—if you can’t determine which
side of the media to print on,
remove the media from the tray,
rotate the stack a half-turn, turn the
stack over, and then place it back in
the tray)
Make sure that... Avoid...
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500