Minolta 2210 Printer User Manual


 
Engine and Controller Specifications160
Electrical
Voltage and Power
RAM Type:
PC-100 Compliant SDRAM DIMMs
Base system RAM:
128 MB
Total RAM:
Upgradable to 384 MB (through 3 DIMM
connectors)
Optional RAM
32, 64, and 128 MB DIMMs
System
software
Softloadable; stored in Flash ROM
Internal IDE
hard disk
Optional, up to 2.2 GB
5"
For information about hard disks recommended
for your printer, see the magicolor 2210 Answer
Base through the Internet at http://
www.minolta-qms.com/support/, or contact
Technical Support (see the
Service & Support
Guide
for a complete listing of support telephone
numbers).
Time-of-day
clock
Optional (socket provided for)
Job
accounting
Crown job accounting; requires an optional IDE drive
Warning
function
convenience
Optional, BuzzBox (light/buzzer printer warning device);
operates over a parallel connection
Convenience
copier
Optional, SC-210 operates over a parallel connection
Voltage and
frequency
US:
120 volts ±10% at 50–60 Hz ±3 Hz
Japan:
100 volts ±10% at 50–60 Hz ±2 Hz
International:
220-240 volts +10% at 50–60 Hz ±3 Hz
Phase
Single
Power
consumption
Mode
Maximum
Operation
Standby
Power saver
100/120 volts—1000 watts
220 volts—1100 watts
250 watts
45 watts
Compliance ENERGY STAR compliant
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500