Filter
Top Products
Lower Feeder Unit
131
2
With one person holding the carrying bars and another holding the two
grips on the left side of the printer, lift the printer and temporarily move it
to a flat, level surface.
3
Remove the lower feeder unit from the shipping carton, and place it where
the printer will be located.
4
Slide out the optional media tray from lower feeder unit.
5
Remove any tape and
packing material.
6
Put media in the optional
tray.
7
Slide the optional media
tray all the way into the lower
feeder unit.
5"
If you have removed the
tray from the lower feeder
unit, slightly tilt up the front
of the tray to insert it into
the guide rails to slide it
back in.
8
Slightly tilt up the
printer’s
upper
media tray to remove it.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500