Filter
Top Products
Remove the Waste Toner Pack147
2
Remove the four toner cartridges and store them in their original packag-
ing. If the original packaging is not available, protect the toner cartridges
from spilling toner.
Remove the Waste Toner Pack
1
With the printer’s front cover open, remove the waste toner pack from
the printer.
2
Use the three plugs on the side of the waste toner pack to seal
the opening.
3
Store the waste toner pack in its original packaging.
Remove OPC Drum Cartridge
Remove the OPC drum cartridge and store it in its original packaging. If the
original packaging is not available, protect the OPC drum cartridge from dam-
age and light.
Remove Transfer Belt
1
Remove the transfer belt and store it in a plastic bag in a box to avoid
toner spillage.
2
Close the printer’s front cover.
Remove the Duplex Unit
5"
If you don’t have a duplex unit installed, skip to the next section.
1
Open the duplex cover and unhook the spring wire.
2
Loosen the two thumbscrews until the duplex unit moves freely away from
the right side of the printer.
3
Lift duplex unit up and away from the printer.
4
Install the original right-side cover that came with the printer.
5
Repack the duplex unit in its original shipping carton for storage or
shipment.
5"
If you’re returning the printer for service, you don’t need to return the
duplex unit, unless the problem is with the duplex unit.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500