Filter
Top Products
Media Types
39
Input Location Upper and Optional Trays
Multipurpose tray
Capacity Up to 50 sheets, depending on the thickness of the
transparencies
If you have problems feeding 50 sheets, try load-
ing only 5–10 sheets at a time. Loading a large
number of transparencies at a time may cause
static buildup, thus causing feeding problems
.
OrientationUpper and
Optional
Trays
Face up
Multipurpose
Tray
Face down
Type Use any full-color transparencies (also known as OHP film) that
meet normal photocopier standards. We recommend
„Q-Media Transparency Media for the magicolor 2200 Series for
color printing
„Q-Media Transparency Media for the magicolor 2200 Series for
monochrome printing
„3M PP2500 for monochrome printing
Duplexing Not supported
Notes „If you touch the face of transparencies with your bare hands,
print quality may be affected.
„Do not handle transparency media too much. Do not fan trans-
parency media before loading it. Resulting static electricity may
cause printing errors.
„Keep the media path clean. Transparencies are especially sen-
sitive to a dirty media path. If there are shadows on either the
top or the bottom of the sheets, see “Cleaning the Printer Inte-
rior” in the
Maintenance Guide.
„You can print continuously with transparencies. However, this
could affect the media feed, depending on the media quality
and printing environment. If problems occur, stop the continu-
ous print and print one sheet at a time.
„Check your application documentation for other information
about printing on transparencies.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500