Filter
Top Products
Status, Error, and Service Messages96
SERVICE CALL 1C FUS
LOW WARMUP
An error has been detected with the item
indicated in the service message. Correc-
tion of these errors is performed by a
MINOLTA-QMS authorized service pro-
vider only. Contact your local vendor.
A service message sometimes occurs as a
result of an unusual combination of events,
not because of an actual problem. When
the printer stops and a service message
displays in the message window, turn the
printer off and then back on. This often
clears the service message indicator, and
printer operation resumes. Always try this
before making a service call.
Service calls should be placed to the ven-
dor from whom you purchased the printer.
If you cannot get service from your vendor,
see the
Service & Support Guide
for addi-
tional contact information.
SERVICE CALL 1D FUS
LOW LOWTMP
SERVICE CALL 1E FUS
LOW HIGTMP
SERVICE CALL 18 FUS
UPP WARMUP
SERVICE CALL 19 FUS
UPP LOWTMP
SERVICE CALL 1F FUS
LOW THERM
SERVICE CALL 20 FUS
RETRACT
SERVICE CALL 21
TRANS DET SENS
SERVICE CALL 22 MAN
TRAY LIFT
SERVICE CALL 29 MEM
MALF COUNTER
SERVICE CALL 2A MEM
MALF DATA
SERVICE CALL 2B MEM
MALF ACCESS
SERVICE CALL 2C MEM
MALF INSTALL
SERVICE CALL 30
5BIN MAIL
SERVICE CALL 31
5BIN INST MAIL
This service
message...
Means...
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500