Filter
Top Products
Remove the Cables
146
3
Remove the toner cartridges.
4
Remove the waste toner pack.
5
Remove the OPC drum.
6
Remove the transfer belt.
7
Remove the duplex unit (if attached).
8
Remove the 5-bin mailbox (if attached).
9
Remove the lower input feeder (if attached).
10
Repack the printer for shipment.
To avoid toner contamination during shipment, the printer should be repacked
without the fuser oil roller, toner cartridges, waste toner pack, OPC drum car-
tridge, or transfer belt installed.
Remove the Cables
1
Turn off the printer.
2
Remove the power cable and all interface cables.
Remove the Fuser Oil Roller
WARNING!
The fuser unit can become extremely hot and cause severe
burns. Make sure the unit is cool before handling it.
ACHTUNG! Die Fixiereinheit kann sehr heiß werden, so daß
Verbrennungsgefahr besteht. Bitte lassen Sie die Fixiereinheit einige
Zeit abühlen, bevor Sie diese berühren.Open the printer’s top cover.
3
Rotate the two lock levers to release the fuser oil roller.
4
Remove the fuser oil roller.
5
Store the fuser oil roller in its original shipping bag.
6
Close the printer’s top cover.
Remove the Toner Cartridges
1
Open the printer’s front cover.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500