Filter
Top Products
Location Requirements
155
Power Requirements
Location Requirements
„ On a hard, flat, level (1° or less slant at any point around the machine)
surface capable of supporting the printer, accessories, consumables, and
media. Weights are shown below.
5"
A surface can be tested for levelness with a standard round pencil.
If the pencil rolls, the surface is not level. Clear the area of any
obstruction or items such as cables that might prevent the printer
from sitting directly on the flat, level surface.
„ In an area with an ambient temperature range of 50°–95° F (10°–35° C)
and relative humidity range of 15%–85% (noncondensating).
Power Japan
100 VAC 50–60 Hz 12 amps
North America
120 VAC 50–60 Hz 8 amps
Europe
220–240 VAC 50–60 Hz 6 amps
Latin America
120 VAC 50–60 Hz 8 amps
220–240 VAC 50–60 Hz 6 amps
Voltage
Fluctuation
Rate
Japan
100 VAC ±10%
North America
120 VAC ±10%
Europe
220–240 VAC ±10%
Latin America
120 VAC ±10%
220–240 VAC ±10%
Frequency
Variation Rate
Within 50–60 ±3 Hz
Component Weight
Printer
87.1 lbs (39.5 kg)
Consumables (such as toner,
OPC drum)
11 lbs (5.0 kg) (total)
Media
5.2 lbs (1.9 kg) per ream of 20 lb
bond (75 g/m
2
) paper
Lower feeder unit (each)
14.8 lbs (6.7 kg)
Duplex unit
5.3 lbs (2.4 kg)
5-bin mailbox
15.5 lbs (7.0 kg)
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500