Filter
Top Products
Loading Media40
Loading Media
Take off the top and bottom
sheets of a ream of paper. Hold-
ing a stack of approximately 250
sheets at a time, fan the stack to
prevent static buildup for the
paper before inserting it in a tray.
5"
Do not fan transparency media.
Attention
Always load the media short edge first.
Attention
Do not mix media of different sizes, types, or weights, as this will cause
printer jamming.
„
When refilling media, first remove any media remaining in the tray. Stack
it with the new media, even the edges, then reload it. Although the magi-
color 2210 was designed for printing on a wide range of media types, it is
not intended to print exclusively on a single media type except plain
paper. Continuous printing on media other than plain paper (such as
envelopes, labels, thick stock, or transparencies) may adversely affect
print quality or reduce engine life.
„
For media other than standard plain paper or transparencies, both the
driver (Paper tab, Paper Type option) and the MP Size key on the control
panel need to be selected.
It is important to use the MP Size key to set the multipurpose tray to the
appropriate media size in order to obtain optimum printing results.
Autoduplexing
Duplex (2-sided) printing can be done automatically with the optional duplex
unit installed.
5"
Only up to 24 lb (90g/m²) plain paper can be duplexed.
OHP
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500