Filter
Top Products
Repack the Printer151
Strapping/Buckling Instructions
1
Thread one end of the
strapping through the
wooden pallet.
2
Pull the two ends of the
strapping together at the
approximate center of the
top of the printer.
3
Thread both ends up
through the center of the buckle.
4
Weave the slack of
one end through
the buckle.
5
Pull the slack on
that end so
that the strapping
is taut in
the buckle.
6
Weave the slack of the other end through the buckle.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500