Filter
Top Products
Replacing the OPC Drum Kit
13
Replacing the OPC Drum Kit
Waste Toner Pack, OPC Drum Cartridge, and Laser Lens
Cover
Attention
The OPC drum is extremely sensitive to bright light and direct sunlight.
Always leave it in its protective bag until you’re ready to install it. Any
exposure to light should be avoided, or permanent damage could
result. Any damage resulting from mishandling of the OPC drum will
void the warranty of the OPC drum. Also, handle the cartridge carefully
by its sides so you don’t touch the surface (the green part) of the drum.
The drum is also extremely sensitive to hand oils and scratches, both of
which reduce print quality.
The three items below are included in the OPC drum kit. If one needs
replacing, replace all three items.
„ Waste toner pack
„ OPC drum cartridge
„ Laser lens cover
The steps are
„ Removing the used waste toner pack
„ Removing the used OPC drum cartridge
„ Replacing the laser lens cover
„ Installing the new OPC drum cartridge
„ Installing the new waste toner pack
Removing the Used Waste Toner Pack
When you replace the OPC drum cartridge, the printer automatically recov-
ers. However, the replaced waste toner pack consumables monitoring system
must be manually reset through control panel (Operator Control/
Consumables/Items Replaced) menu.
1
Open the printer’s front cover.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500