Filter
Top Products
Replacing the Fuser Oil Roller
27
3
Remove the new fuser oil roller from its shipping box.
Attention
If you set the new fuser oil roller on a table, do it
as shown in the illustration. Do not allow the
roller surface to contact the table or get dirty.
This could lower image quality.
4
Insert the new
fuser oil roller
installation guides
(front, rear) into
the fuser unit
installation rail.
5
Carefully lower the
roller.
6
Rotate the two oil roller levers
to lock the oil roller into place.
Attention
If the two fuser oil roller release levers are not correctly set, the
top cover cannot be closed. Set the release levers to the roller
fixed position.
7
Carefully close the top cover.
Check the release button to make sure the top cover is properly closed.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500