Filter
Top Products
13 - 20
13. OPTIONS AND AUXILIARY EQUIPMENT
13.1.4 Servo configurations software
The servo configuration software (MRZJW3-SETUP154E) uses the communication function of the servo
amplifier to perform parameter setting changes, graph display, test operation, etc. on a personal
computer.
(1) Specifications
Item Description
Communication signal Conforms to RS-232C.
Baudrate [bps] 57600, 38400, 19200, 9600
Monitor
Display, high speed monitor, trend graph
Minimum resolution changes with the processing speed of the personal computer.
Alarm Display, history, amplifier data
Diagnostic
Digital I/O, no motor rotation, total power-on time, amplifier version info, motor information,
tuning data, absolute encoder data, automatic voltage control, Axis name setting.
Parameters Parameter list, turning, change list, detailed information
Test operation Jog operation, positioning operation, motor-less operation, Do forced output, program operation.
Advanced function Machine analyzer, gain search, machine simulation.
File operation Data read, save, print
Others Automatic demo, help display
(2) System configuration
(a) Components
To use this software, the following components are required in addition to the servo amplifier and
servo motor:
Model (Note 1) Description
(Note 2)
Personal
computer
IBM PC-AT compatible where the English version of Windows 95, Windows 98, Windows Me, Windows
NT Workstation 4.0 or Windows 2000 Professional operates
Processor: Pentium 133MHz or more (Windows 95, Windows 98, Windows NT Workstation 4.0,
Windows 2000 Professional)
Pentium 150MHz or more (Windows Me)
Memory: 16MB or more (Windows 95), 24MB or more (Windows 98)
32MB or more (Windows Me, Windows NT Workstation 4.0, Windows 2000 Professional)
Free hard disk space: 30MB or more
Serial port used
OS
Windows 95, Windows 98, Windows Me, Windows NT Workstation 4.0, Windows 2000 Professional
(English version)
Display
One whose resolution is 800
600 or more and that can provide a high color (16 bit) display.
Connectable with the above personal computer.
Keyboard Connectable with the above personal computer.
Mouse Connectable with the above personal computer. Note that a serial mouse is not used.
Printer Connectable with the above personal computer.
Communication
cable
QC30R2
When this cannot be used, refer to (3) Section 13.1.2 and fabricate.
Note: 1. Windows and Windows NT are the registered trademarks of Microsoft Corporation in the United State and other countries.
2. On some personal computers, this software may not run properly.
(b) Configuration diagram
CN3 CN2
Personal computer
To RS-232C
connector
Communication cable
Servo amplifier
Servo motor