Filter
Top Products
56
2
.2 List of Parameters Classified by Purpose of Use
Set the parameters according to the operating conditions. The following list indicates
purpose of use and corresponding parameters.
Parameter Numbers
Purpose of Use
Parameter numbers which must be set
Use of extended function parameters Pr. 30
Operation mode selection
Pr. 53, Pr. 79
(Communication parameters n10, n17)
Acceleration/deceleration
time/pattern adjustment
Pr. 7, Pr. 8, Pr. 16, Pr. 20, Pr. 29, Pr. 44,
Pr. 45
Selection of output characteristics
optimum for load characteristics
Pr. 3, Pr. 14, Pr. 19
Output frequency restriction (limit) Pr. 1, Pr. 2
Operation over 60Hz <50Hz>
Pr. 1, Pr. 38, Pr. 39,
Calibration parameter C4, C7
Adjustment of frequency setting signals
and outputs
Pr. 38, Pr. 39, Pr. 73,
Calibration parameter C2 to C7
Motor output torque adjustment Pr. 0, Pr. 98
Brake operation adjustment Pr. 10, Pr. 11, Pr. 12
Multi-speed operation
Pr. 1, Pr. 2, Pr. 4, Pr. 5, Pr. 6, Pr. 24, Pr. 25,
Pr. 26, Pr. 27, Pr. 80, Pr. 81, Pr. 82, Pr. 83,
Pr. 84, Pr. 85, Pr. 86, Pr. 87
Jog operation Pr. 15, Pr. 16
Frequency jump operation Pr. 31, Pr. 32, Pr. 33, Pr. 34, Pr. 35, Pr. 36
Automatic restart operation after
instantneous power failure
Pr. 57, Pr. 58
Slip compensation setting Pr. 95 to Pr. 97
Related to operation
Setting of output characteristics
matching the motor
Pr. 3, Pr. 19, Pr. 71
Electromagnetic brake operation timing Pr. 42, Pr. 64, Pr. 65
Sub-motor operation
Pr. 0, Pr. 3, Pr. 7, Pr. 8, Pr. 44, Pr. 45,
Pr. 46, Pr. 47
Operation in communication with
perasonal computer
Communication parameters n1 to n12
Operation under PID control
Pr. 60 to Pr. 65, Pr. 73, Pr. 79, Pr. 88 to
Pr. 94
Related to appication
operation
Noise reduction Pr. 70, Pr. 72