Filter
Top Products
4. DS1 Facility Commands
4-14
August 2002 4200-A2-GB20-00
Example
Retrieve the near-end alarm indication signal count above 4096 for a 15-minute
period beginning at 8:30 a.m. on January 10.
RTRV-PM-T1:TAMPA:DS1NTA:42::AIS,4096-UP,NEND,,15-MIN,01-10,0
8-30;
TAMPA 02-01-24 12:30:43
M 42 COMPLD
/*
RTRV-PM-T1:TAMPA:DS1NTA:42::AIS,4096-UP,NEND,,15-MIN,01-10,0
8-30 */
"DS1NTA:AIS,2015,,NEND,,15-MIN,01-10,08-30"
;
Related Command
RTRV-ALM-T1
on page 10-12
Table 4-11. RTRV-PM-T1 Response Parameters
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
aid_ds1 As described for command parameters, except that DS3NT is not used
[aid_type] Type of AID. The value is T1.
monds3 As described for command parameters, except that ALL is not used
monval Measured value for the monitored parameter (0−4294967295)
[locn] As described for command parameters
[tmper] As described for command parameters
[mondat] As described for command parameters, except that ALL is not used
[montm] As described for command parameters, except that ALL is not used
errcde Error code (see Appendix A,
Error Codes
)