Filter
Top Products
D. Hotwire 6390 ReachDSL Modem Download
4200-A2-GB20-00 August 2002
D-3
Procedure
To create a PVC from the GrandDSLAM 4200 port to the Hotwire 6390 ReachDSL
modem:
1. Log into the GranDSLAM 4200 unit using the
ACT-USER
command.
For example, type:
ACT-USER:TAMPA:SUPERUSER:100::********
2. Create a VCL to the upstream network (on the NT) with VPI=1 and VCI=33
using the
ENT-VCL
command.
For example, type:
ENT-VCL:TAMPA:NTVCL-1-33:100::1,1;
3. Create a VCL to the Hotwire 6390 ReachDSL Modem attached to Port 1 (on
the LT) with VPI=0 and VCI=33 using the
ENT-VCL
command.
For example, type:
ENT-VCL:TAMPA:LTVCL-1-1-1-1-0-33:100::1,1;
4. Create a cross connection between the upstream ATM network (NT) and
Port 1 (LT) using the
ENT-CRS-VC
command.
For example, type:
ENT-CRS-VC:TAMPA:NTVCL-1-33,LTVCL-1-1-1-1-0-33:100::::IS;
5. Define a management PVC path across the ATM network to reach the
GranDSLAM 4200 1/33 uplink management PVC using 1483 routed
encapsulation.
6. Assign a Gateway IP address of 135.26.95.6/29 (where 29 is 29 bits in the
subnet mask), if needed, to the router port.
7. Ping the Hotwire 6390 ReachDSL Modem Management IP address
(135.26.95.1) from the network side.