Filter
Top Products
12. Security Commands
4200-A2-GB20-00 August 2002
12-15
Example
Retrieve the security levels for user RICHARD.
RTRV-USER-SECU:TAMPA:RICHARD:42;
TAMPA 01-11-24 12:30:43
M 42 COMPLD
/* RTRV-USER-SECU:TAMPA:RICHARD:42 */
"RICHARD:RTRV:PAGE=0,UAGE=0"
;
Related Commands
DLT-USER-SECU
on page 12-2
ED-USER-SECU
on page 12-8
ENT-USER-SECU
on page 12-10
Table 12-14. RTRV-USER-SECU Response Parameters
Parameter Explanation
tid Target NE identification
yy-mm-dd Year (two digits), month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
uid As described for command parameters
uap User Access Privilege. Valid values are:
NULL: User has no access rights.
RTRV: Retrieve. Report and retrieve commands only (no configuring).
PROV: Configuring (provisioning). Report, retrieve, and configuration
commands allowed. No system administrator tasks including
management of the NE.
SUPER: Supervisor. All user functions allowed.
[uid_nblk] Named parameter block for UID. The block consists of one or more of
the following parameters, each followed by an equal sign and a value.
PAGE: The password aging interval (0). A value of 0 disables the
feature.
UAGE: The UID aging interval (0). The UID is disabled if no successful
logon occurs during this period. A value of 0 disables the feature.
errcde Error code (see Appendix A,
Error Codes
)