Filter
Top Products
10. Fault Commands
10-20
August 2002 4200-A2-GB20-00
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/* RTRV-ATTR-ALL:[tid]:aid_all:[ctag]::[ntfncde],
[cond_all] */
errcde
;
Table 10-12. RTRV-ATTR-ALL Response Parameters
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see Appendix A,
Error Codes
)
aid Access Identifier associated with the alarm. Valid values are:
ADSL: All ADSL equipment
EQPT: All equipment
T1: All DS1 facilities
aid_type The type of Access Identifier. Valid values are ADSL, EQPT, and T1.
ntfncde As described for command parameters (see Table 10-11,
RTRV-ATTR-ALL Command Parameters), except that ALL is not used.
cond As described for command parameters (see Table 10-11,
RTRV-ATTR-ALL Command Parameters), except that ALL is not used.
[locn] Location of the condition. Valid values are:
NEND: Near End
FEND: Far End
[dirn] Signal direction. Valid values are:
RCV: Receive
TRMT: Transmit