Filter
Top Products
10. Fault Commands
4200-A2-GB20-00 August 2002
10-3
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response will be sent:
IP c
After the above response, a new command input may be generated.
Normal Response:
sid yy-mm-dd hh:mm:ss
M c COMPLD
/* RTRV-ALM-ADSL:[tid]:aid_adsl:[ctag]::[ntfncde]
,,[srveff] */
"aid_adsl,aid_type:ntfncde,cond_adsl,serveff,,,locn,
dirn,:cond_descr"
;
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/* RTRV-ALM-ADSL:[tid]:aid_adsl:[ctag]::[ntfncde],,
[srveff] */
errcde
;
Table 10-2. RTRV-ALM-ADSL Response Parameters (1 of 2)
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see Appendix A,
Error Codes
)
aid_adsl As described for command parameters (see Table 10-1,
RTRV-ALM-ADSL Command Parameters), except that ALL is not used.
[aid_type] The type of Access Identifier. The value is ADSL.
ntfncde As described for command parameters (see Table 10-1,
RTRV-ALM-ADSL Command Parameters), except that ALL is not used.